Text only | Text with Images

Classic 2CV Racing Club

Classic 2CV Racing Club Ltd Forum => Technical => Topic started by: philip myatt on October 22, 2009, 14:03:35

Poll
Question: should filled heads be allowed for a transition year
Option 1: yes with ballast votes: 1
Option 2: no votes: 17
Title: 2010 rules
Post by: philip myatt on October 22, 2009, 14:03:35
To help the debate with filled heads, please vote if you think they should be allowed or not.
Title: Re: 2010 rules
Post by: Christine Savage on October 26, 2009, 09:20:34
How do I vote yes for filled heads and no for ballast, in fact how do I vote I don't seem to have any buttons that I would expect to see for a poll?

Christine
Title: Re: 2010 rules
Post by: Derek Coghill on October 26, 2009, 11:27:51
No buttons apparent here either - again, yes to filled heads, no to ballast.
Title: Re: 2010 rules
Post by: Chris Yates on October 26, 2009, 11:30:57
At the top of this page, under this line:

The 2CV Racing Club > 2CV Racing Club Forum > Technical > 2010 rules

There should be voting buttons. You do need to be logged in to the forum to see them though.
Title: Re: 2010 rules
Post by: Mary Lindsay on October 26, 2009, 11:40:24
No buttons show for me either, they were there but seem to have disappeared.
Title: Re: 2010 rules
Post by: Chris Yates on October 27, 2009, 10:16:03
Voting is now locked. Phil set the poll to finish yesterday just after 1pm.
Title: Re: 2010 rules
Post by: Martin Harrold on October 27, 2009, 19:01:04
Doubling up

If I'd had the chance to vote, I would have voted in favour of the ballast proposal.
Title: Re: 2010 rules
Post by: John-Paul Wilkinson on October 27, 2009, 21:12:45
Yes to filled heads and no to ballast for me.
Title: Re: 2010 rules
Post by: San on October 30, 2009, 17:20:30
Yes to filled heads and no to ballast for me too
Title: Re: 2010 rules
Post by: Trevor Williams on October 31, 2009, 17:25:18
All superfluous as the choice was either "No" or "Yes with ballast"!
Title: Re: 2010 rules
Post by: FastKars on May 24, 2010, 11:34:38
Hi.....what was actually the end result? I read in the regs that "Both removal and/or addition of material in the induction and exhaust ports is permitted."
So it is officially allowed now? Only in 2010 or is this a so called "transition year"? And what about any ballast?

cheers Kars
Title: Re: 2010 rules
Post by: Paul Robertson on May 25, 2010, 09:47:32
Filled ports are permitted ,no ballast.
Text only | Text with Images