Classic 2CV Racing Club

Classic 2CV Racing Club Ltd Forum => Technical => Topic started by: Trevor Williams on January 23, 2007, 19:13:50

Title: Info required on Club Camshaft
Post by: Trevor Williams on January 23, 2007, 19:13:50
Right,
I've had a very bad day at work, so all of you are going to suffer as well!!!

Before the first race of the season I require all of you who own club camshafts to inform me of the serial numbers of the camshaft, together with details of which engine they are in if appropriate.

This information will form a register of the club camshafts which can be compared to the records that we have at Kent Cams

Failure to supply the information may result in you getting to know our new scrutineer very well, very quickly

Cheers

Trevor
Title: Info required on Club Camshaft
Post by: Francis Rottenburg on January 24, 2007, 13:39:39
Trevor can you remind me where the number on the cam is stamped please?  I take it we don't need to disassemble the engine to get it?
Title: Info required on Club Camshaft
Post by: Trevor Williams on January 24, 2007, 14:07:53
Francis,
The number is stamped on the oil pump end of the camshaft. To access it while still in the engine you have to remove the Clutch, flywheel and the oil pump cover. You should then see the number stamped on the end of the cam
Cheers
Trevor
Title: Info required on Club Camshaft
Post by: Derek Coghill on January 24, 2007, 21:59:42
The cam number should also be stamped on the crankcase. On the top near the drilled bolt somewhere, I think?
Title: Info required on Club Camshaft
Post by: Geoff Archer on January 26, 2007, 22:54:21
now were in the regs says that??
Title: Info required on Club Camshaft
Post by: Derek Coghill on January 27, 2007, 00:11:08
Don't know, but I do remember it as being part of the Great Camshaft Scenario. So I did it.
Title: Info required on Club Camshaft
Post by: Trevor Williams on January 27, 2007, 07:32:21
Geoff
It is in the wording of the camshaft scheme and by implication it must be done
Trevor
Title: Camshaft Numbers
Post by: Trevor Williams on February 14, 2007, 20:52:38
So far I have received the sum total of seven camshaft numbers. That includes my four engines!!

Please get this information to me ASAP

Cheers

Trevor
Title: Info required on Club Camshaft
Post by: Derek Coghill on February 14, 2007, 21:44:14
73, 91 and 92. I have another one; it's in an engine at Bill's and it'll be either 90 or 93 but I don't know which. 73 was originally Katie Croucher's, I think; it and another were retrieved from the bins at Snetterton one year. Do you want the number of the other saved-from-a-bin one too? I don't have the cam, though.
Title: Info required on Club Camshaft
Post by: Trevor Williams on February 15, 2007, 08:02:31
Derek
All numbers of cams in your possesion please
Thanks
Trevor
Title: Info required on Club Camshaft
Post by: Matthew Hollis on February 23, 2007, 12:18:31
43, 44, 45, 71, 148 & 149
Title: Info required on Club Camshaft
Post by: Trevor Williams on February 23, 2007, 12:54:28
Thanks Matt
Title: Info required on Club Camshaft
Post by: Andy Craig-Smith on March 01, 2007, 16:41:38
103 & 140
Title: Info required on Club Camshaft
Post by: Trevor Williams on March 01, 2007, 16:52:32
Thanks Andy

There are still a lot of gaps in the information that I hold on who has possession of which camshafts

Unless you want your time at Brands to be taken up with providing me the information I suggest people start providing it sooner rather than later!!

Cheers

Trevor
Title: Info required on Club Camshaft
Post by: Ben Allan on March 06, 2007, 22:01:40
9 and 125,

Thanks Paul

Ben
Title: Cam numbers - Team Fine Print
Post by: Martin Harrold on March 11, 2007, 15:14:55
We appear to have:

51
52
142
143

Martin H
Title: Info required on Club Camshaft
Post by: Simon Crook on March 11, 2007, 20:46:10
Hi Trevor

just to keep tabs on the camshafts, I have the following:

150, 151, 152, 153

Simon
Title: Info required on Club Camshaft
Post by: Bob Rice on March 27, 2007, 16:32:38
107 and 113

Bob Rice
Title: Re: Info required on Club Camshaft
Post by: Scuderia cavallino on December 13, 2011, 10:07:54
Do you still need cam numbers?
If so I have now got 238

Andrew Holman
Title: Re: Info required on Club Camshaft
Post by: neandethal on December 18, 2011, 19:30:59

Again if still needed we have cam numbers 97 and 98, to go with our car number 50.

cheers, Ian
Title: Re: Info required on Club Camshaft
Post by: Scuderia cavallino on July 11, 2012, 11:55:26
and now 245
Title: Re: Info required on Club Camshaft
Post by: Sean on July 11, 2012, 21:36:39
Quote from: Derek Coghill on February 14, 2007, 21:44:14
73, 91 and 92. I have another one; it's in an engine at Bill's and it'll be either 90 or 93 but I don't know which. 73 was originally Katie Croucher's, I think; it and another were retrieved from the bins at Snetterton one year. Do you want the number of the other saved-from-a-bin one too? I don't have the cam, though.

101 but ill need to get in to the lockup and double check ( its the other KC skip one) another one somewhere in the big box of stuff from Yorkshire
dont know whats in Rambo but suspect its toast so its academic.