Messages

Get well soon Dicky - I need some more advice. Martin Sadler

Good evening, I have driven in the crusader vans team last year and several times over the last 6 or 7 years. Renault 5 turbo in 1980's Clios in 90's and then Britcar. Give me a call  if there is a drive available. 07867 798680 Martin

Both now sold
martin

[£10495.00 + Vat each. (these are listed at £26360 + Vat + RFL new)]

I have for sale 2 ex-Redbull F1 support vans.
Renault Master LWB in Silver fitted with Sat Nav, Tow bars, Tachographs and ply lined.
Registered on '11' plates with 23 and 25,000 miles.
Both in excellent condition with no body damage as you would expect from an F1 team. When collected from the Milton Keynes factory they were cleaner and more polished than my car! Unfortunately all the F1 livery was removed before I got them!
£10495.00 + Vat each. (these are listed at £26360 + Vat + RFL new)
Both will have the 25,000 service completed before sale and will come with the balance of the manufactures 3year/10,000 mile warranty, and breakdown assistance package. Finance available
Give me a call if interested, The vans are in Oxford for viewing.
Martin Sadler 07867.798680 any time. 01296.733525 (home, evenings)

I have at least 2 that I could put in with yours to help make up a batch. Regards Martin 07867 798680

Hi
I've got at least 2 that need doing im on 07867.798680, give me a call i'm about 10 miles from silverstone.
regards
martin

I have been trying to acheive an effective leaf free mounting of the carb to manifold joint. It all started with one Keith Shoebridges engines at Snet that we didnt effectively cure. I've just started on my engines and its even worse! The adapter plate fits in such a way that there is almost 1mm of gap over the counter sunk screw head - thats an awful lot a lot of gasket goo. The leak is so bad the engine barley runs. Is that the correct way of fitting? Also the adapter plate shrouds the carb throughts badly. I presume we just flow them into the manifold? Any body got any ideas?

Good evening phil,
please order me a carb kit, I can deliver a manifold to you at silverstone if thats ok by you? Also do you have the valves in stock?
Reply on 07867.798680 or [email protected].
Regards
Martin

Hi,
Thanks for the replys.

Sean would be interested if the price was right.

Paul, that would be grear - where are you?

Chris' Unfortunately no these kits cannot handle either the type and position of the flare or the bore of pipe. I did look into several of them and indeed have 2 kits including a very large Sykes kit that are no good.

Regards
Martin

Hi, does any one know where I can buy (at reasonable money), rent, or even borrow a tool to make 2cv brake pipe flares? I have spoken to Roy at Ecas who recommended Pleiades 01487.831239. However they no longer sell them.
Any ideas?
martin
07867.798680

Thanks all, i'll first look at the rod arrangement and if unsuitable then i'll look at the cable (more costly) fittings.

Hi, I'm fitting a bx handbrake to my car, what cables do you use? or do they have to be made to fit?
Thanks.

Hi Steve,
Im in between Bicester, Buckingham and Aylesbury just off J9 M40. I've got my car reduced to bits at present and if you want to see where to look on one of these things I can show you all the critical points.
regards
Martin
01296733525 / 07867798680

Good evening,
As some one who is building a car for next year I could do with a set of 2010 regs. Could somebody email me a set - please!
Please forward to [email protected]
Thank you

Thanks Paul,
I've just pinged him off an email. How much are they?
Martin