Messages

WANTED LIGHTENED FLYWHEEL TO FIT 1983 2CV WITH DIAFRAM CLUTCH TYPE ENGINE( DISC BRAKED MODEL)
MUST HAVE GOOD STARTER RING ON IT,AND NO SILLY PRICES PLEASE AS I COULD GET MINE STANDARD ONE DONE FOR £60 .

THANKS FOR ALL INFORMATION LADS I WILL HAVE IT ROLLING ROAD SET FIRST THEN TO SEE IF THE JETTING IS RIGHT.

i would make one derek if i knew how thick i can go with it causing fuel delveiery problems.

DEREK WOULD BE INTRESTED IN HOW YOU ARE BUILDING YOUR INJECTION SYSTEM,AND HOW YOU SET IT UP AND HOW IT RUNS.
IF IT TURNS OUT ALRIGHT I MIGHT TRY AND FIT A SIMILAR SYSTEM TO MY ROAD GOING TRIKE.
I KNOW NORTHALLERTON TUNERS WERE EXPERIMENTING WITH A SYSTEM BY THE LOOKS OF THEIR SITE,BUT KNOW MORE INFORMATION WAS POST ON THEIR WEBSITE.ANYWAY GOOD LUCK WITH SYSTEM.

HI HERE I AM LOOKING FOR THE THICKER CARB INSULATION SPACER THAT WAS USED BY RACERS UNTIL THEY OUTLAW IT IN 2CV RACING .
THIS SPACER WAS MEANT TO IMPROVE TORQUE OF A SERIES ENGINES.
I AM NOT USING IT FOR RACING BUT GOING TO PUT IT ON MY TRIKE TO SEE IF IT IMPROVE THE TORQUE WHEN TOWING MY TRAILER.
IF ANYBODY HAVE STILL GOT ONE OF THESE SPACERS PLEASE LET ME KNOW HOW MUCH YOU WANT FOR IT AND WERE TO SEND THE PAYMENT TOO.CHEERS REVBADTOAD.

TRY LOOKING ON EBAY FOR A BOOK IN THE 2CV CATOGEROY THE BOOK CALLED( ITS NOT A MOUSE BUT A LION )IN THIS TUNING BOOK IT TELL YOU WHAT CARBS TO USE .IF YOU WHAT TO USE TWIN CARBS USE MOTOGUZZI 750 -1000 CARBS AND MANIFOLDS .IF USING ON 602 ENGINE IT WAS FOUND OUT IF RUN WITHOUT AIRFILTERS NO RE JETTING WAS REQUIRED.IF YOU DONT RUBBER MOUNT THEM THOUGH YOU MIGHT GET PETROL FROFFING IN THE FLOAT BOWLS OF THE CARBS.

MANAGED TO FIND 2CV ENGINE AND BOX NOW THANKS FOR OFFER MARC.

sorry i thought you were after a 2cv crank reconditioning,for the type of crank in your picture try beckitt and gardner in sheffield ,they have always help me out in the past and they did a v12 jag crank for my mate not long ago and he is well please with their work.

hi marc cheers for your help bro,will wait until you get back to me ,hopefully before wednesday;otherwise i will have to go to 2cv city in halifax for one.as i need to make sure the engine i fit into my trike is ok,as i will be going down ely way at end of may .
so hopefully you will come up tops for me.

try stp for rebuilt cranks they are on the web,type in 2cv tunning on google their website will come up .they rebuild using better bearing than standard 2cv and also offer other crank mods too.hope this helps you out.

HI PEOPLE I AM NEW TO THE FORUM AND I AM LOOKING FOR A 2CV ENGINE FOR MY TRIKE AS THE ENGINE THAT WAS IN IT WAS DISTONYED BY A BRICK HITTING THE FAN ;WHICH BENT THE CRANK AND ALSO CAUSED THE PISTONS TO HIT THE VALVES.HENCE NEED COMPLETE NEW ENGINE FOR TRIKE.WILL TO PAY REASONABLE PRICE FOR GOOD SECONDHAND MOTOR IN GOOD CONDITION ,WILL TO COLLECT WITH IN 50 MILES OF CHESTERFIELD DERBYSHIRE.SO IF YOU HAVE A GOOD SECONHAND ENGINE FOR SALE PLEASE LEAVE INFRO ON FORUM FOR ME IE CONTACT NUMBER AND PRICE FOR ENGINE.THANKS AGAIN PEOPLE FOR YOUR HELP IN THIS MATTER.